Will mold come back after cleaning with vinegar?

Vinegar successfully kills mold on drywall and leather. This means that the mold is likely to grow again. Vinegar has antifungal and antibacterial properties and can be a cheap and effective treatment for many types of mold. Smaller areas of mold growth that are detected early can be eliminated with some basic cleaning products by following some safety guidelines.

There are several biocidal products that kill mold more quickly than vinegar, but white distilled vinegar or cleaning vinegar are less toxic to the environment and to humans. It is important that the vinegar you use has an acetic acid level of 4.0% to 4.2% or higher. Distilled white vinegar from the condiment aisle contains about five percent acetic acid and 95 percent water. Cleaning vinegar contains about six percent acetic acid.

While vinegar kills mold, it works slowly, and mold discoloration and stains may remain and require additional scrubbing with a household cleaner. Vinegar leaves a peculiar smell when used in quantities, and you'll have to eliminate mold growth. But this smell will go away in a few hours. Be sure to keep windows open to facilitate cross ventilation.

To clean mold with hydrogen peroxide, you can apply standard 3% hydrogen peroxide directly to the mold with a spray bottle. Unfortunately, not only do bleach and vinegar not effectively remove mold spores, but they can stick to the rag, which, when used elsewhere (or left to sit wet under the sink), can spread mold contamination to other rooms. While bleach and vinegar don't get rid of mold, there are many different methods used by professional mold remediators that are just as safe but infinitely more effective. It's important to get rid of mold safely so that it doesn't return and doesn't cause further damage to your property.

The Department of Environmental Protection recommends professional removal of mold colonies that cover more than 10 square feet (approximately a three-foot by three-foot patch). Once you finish removing the mold with the brush, it's time to rinse the surface with warm water. As one of the most pervasive myths about mold on the Internet (and we've seen a few), this common tactic often ends up with homeowners calling a mold treatment company like MoldTech anyway, often with a bigger problem than they had at first. Your local public health department can offer advice on mold testing and refer you to a mold remediation company.

Smaller mold removal projects may be tackled organically with simple distilled white vinegar. Take items outside to remove as much of the mold from the surface as possible, which prevents mold spores from spreading inside your home. If mold has left the grout or other finishes discolored, you'll need to use an oxygen-based bleach solution to remove stains. Read on to learn when vinegar can be an effective solution for removing mold from your home, how it compares to other options, and when you should call a professional cleaner.

Attacking and eliminating mold in time is vital to prevent spores from spreading to unaffected areas of the house and preventing any respiratory illness.

Leave Message

Required fields are marked *